|
Eyrie Productions, Unlimited
thorne
Charter Member
|
Apr-28-02, 08:54 PM (EDT) |
|
"Finding toys to re-enact EPU sagas"
|
Repurposing toys into UF (I hope this is a suitable forum -- the following notion is creative, but not non-EPU; it applies to all EPU sagas; it's not precisely community chatter...) Here's project, fun for the whole family, provided they're sad obsessed fans: collect existing toys and organize them to represent the cast of EPU stories (UF, NXE, etc.). No doubt Japan's toy companies have created action figures for every anime ever sourced by EPU, but most of them haven't reached North America. American source material ("Trek", "Star Wars", B5, etc.) are a little easier to find. Original characters, especially the kids, you won't be able to *collect* -- you'll have to kitbash. (In most cases of my own toy collecting/harvesting, I wait till items sink to the discount racks.) * BEC made a variety of 8-inch "Real Model" action figure versions of the Evas from NGE. Slap on some X-Com decals (eg, printed on your inkjet), and you've entered NXE. (Formerly available at various video game stores.) * To crew IPO station "Babylon 5", use: Playmates made 6-inch "Star Trek" figures (TOS, TNG, DS9), some of them more articulated than others. WB Toys made 6-inch "Collectors Series" figures (low articulation) of Sheridan, G'Kar, Londo and Delenn (but no Ivanova). Unfortunately they're all probably wearing the wrong uniforms, and "Enterprise" figures aren't yet available (for Phlox and Malcolm Reed). * Bandai makes a line of figures called "Anime Collection": each bubblecard features one mech and two figures. From "Cowboy Bebop" there's the Swordfish, with Spike and Faye; from "Big O", there's the Big O, with Roger and Dorothy. (Available at Toys'R'Us.) * There are oodles of "Star Wars" toys, of course, but since Gryphon's _Daggerdisc_ is a YT-1312 with the cockpit on the *right* side, it might be easier to modify the LEGO 7190-"Millenium Falcon". One could try to rebuild the 7166-"Imperial Shuttle" in blue to recreate Truss's Network 23 _Morning Sun_, but I don't think all the necessary elements are *available* in blue. LEGO bricks could also easily recreate the Duelists' Castle on Jeraddo -- in fact, with some paint and decals, one could make minifig customs of *all* the characters. Human, anyway -- T'skaia might be a problem. * Only a few "Farscape" species have wandered into the UFiverse, and no specific characters, so *that* action figure line isn't useful yet. * "Robotech" toys circa-1985 are a bit rare nowadays. "Super-posable Veritechs" have been promised by robotech.com for months now, but they look pricey and non-transformable. * Ditto for the few Transformers who've appeared (in non-"Cybertron Dreams" stories): Optimus Prime, Blaster. Further ideas? (Next sad obsessed activity: stop-motion films *using* the collected figures. It'll be like Nickelodeon's "Action League Now", but with fewer smashing dismemberments. Possibly.) -- Phillip Thorne The Non-Sequitur Express - usually accurate, sometimes relevant, occassionally timely "You dare agree with me? Prepare to meet your horrible doom!" --Invader Zim |
|
|
Printer-friendly page | Top |
|
|
TRB
Member since Jan-4-21
|
Apr-29-02, 00:18 AM (EDT) |
|
2. "RE: Finding toys to re-enact EPU sagas"
In response to message #0
|
Laudre and I once threw out the idea of kitbashing a Lego TIE Tank, using a Lego TIE (he thinks we should use the regular TIE; I want to use the much bigger deluxe TIE Interceptor). Assuming we can find a source for suitable treads. TRB |
|
|
Printer-friendly page | Top |
|
|
|
satyap
Charter Member
|
Apr-29-02, 01:13 AM (EDT) |
|
4. "RE: Finding toys to re-enact EPU sagas"
In response to message #2
|
>Laudre and I once threw out the idea of kitbashing a Lego TIE Tank, >using a Lego TIE (he thinks we should use the regular TIE; I want to >use the much bigger deluxe TIE Interceptor). Assuming we can find a >source for suitable treads. Weird. I have a TIE Interceptor, snap-kit from MPC (8931). I've sorta-painted it and glued some of the parts. The box doesn't say what scale, but it's 6 inches long. Ha, it claims to be molded in color but is not. -- Satya. |
|
|
Printer-friendly page | Top |
|
|
|
|
Laudre
Charter Member
|
Apr-29-02, 01:22 AM (EDT) |
|
5. "RE: Finding toys to re-enact EPU sagas"
In response to message #4
|
>>Laudre and I once threw out the idea of kitbashing a Lego TIE Tank, >>using a Lego TIE (he thinks we should use the regular TIE; I want to >>use the much bigger deluxe TIE Interceptor). Assuming we can find a >>source for suitable treads. > >Weird. I have a TIE Interceptor, snap-kit from MPC (8931). I've >sorta-painted it and glued some of the parts. The box doesn't say what >scale, but it's 6 inches long. It's rather tough to determine scale with regards to SW stuff -- there's nocanon info on ship dimensions, and "official" info (RPGs, tech manuals, video games and the like) is often contradictory, and the rule seems to be that the more prominent the ship is, the harder it is to build a workable model of it. -- Sean -- ...I've become convinced that Escher designed the Millenium Falcon... Rabid Crack Weasel #42 "All tribal myths are true, for a given value of 'true'." -- Terry Pratchett The Broken Link Follow my creative process
|
|
|
Printer-friendly page | Top |
|
|
|
|
|
|
megazone
Charter Member
|
Apr-29-02, 03:38 AM (EDT) |
|
7. "RE: Finding toys to re-enact EPU sagas"
In response to message #2
|
>Laudre and I once threw out the idea of kitbashing a Lego TIE Tank, >using a Lego TIE (he thinks we should use the regular TIE; I want to >use the much bigger deluxe TIE Interceptor). Assuming we can find a >source for suitable treads. They make several sizes of lego treads, from what are basically black rubber bands moulded as treads, to large treads made of plastic links that all snap together. I had a Technics bulldozer kit that used them - well, I think I still have it, I have a couple of boxes of Lego bricks. |
|
|
Printer-friendly page | Top |
|
|
|
|
|
|
thorne
Charter Member
|
May-02-02, 09:21 PM (EDT) |
|
19. "RE: Finding toys to re-enact EPU sagas"
In response to message #8
|
Megazone wrote on 4/29: >>They make several sizes of lego treads, from what are basically black >>rubber bands moulded as treads, to large treads made of plastic links >>that all snap together. <...>Much to the irritation of Technics engineers, the #3873 tread segment (also suitable for conveyor belts) is no longer "in print" ("in mold"?), AFAIK. One dedicated builder once used a great many of them to replicate NASA's mobile launch platform (he concealed the pendulum-based balancing mechanism inside a Saturn V replica). Phantom added: >Also Mega Bloks Transforming Blok Bots has a Gladiator that >turns into a tank. It has some nice treads <...> The 9707-"Combat Tank" has the same rubbery treads as the 9358-"Gladiator and Lion", I think. (I have three copies of the former set -- I was planning at the time to build a rendering of the _Roger Young_ from "Roughnecks: Starship Troopers Chronicles", and the set includes many sloped bricks in drab-green.) You'll have to use the corresponding wheels and axle-plates: the treads aren't compatible with Technic gears, so they can't be driven. :( (Gah, the MegaBloks catalog is Flash-based. Some... visitors... still... use... dial-up... y'know... Okay, the Parents catalog is minimally organized, but at least uses plain HTML.) Fortunately, there are no treaded vehicles with starring roles in UF et al. IIRC, not even the Game Tank from "Tron" (wayyyy back in Core #1) had them, IIRC. -- Phillip Thorne The Non-Sequitur Express - usually accurate, sometimes relevant, occassionally timely "Today's lecture is about outer space and how it will eventually *implode* upon itself." --Invader Zim |
|
|
Printer-friendly page | Top |
|
|
|
|
|
satyap
Charter Member
|
Apr-29-02, 01:11 AM (EDT) |
|
3. "RE: Finding toys to re-enact EPU sagas"
In response to message #0
|
>* "Robotech" toys circa-1985 are a bit rare nowadays. >"Super-posable >Veritechs"> have been promised by robotech.com >for months now, but they look pricey and non-transformable. I have tiny 3-inch tall (I think ... yes, it's 1:200) figures of veritechs in gerwalk mode. They dn't transform. I haven't assembled the 2nd one, and the 1st one is still awaiting final assembly pending decaling. They came two in one box. Instructions and box-art in some far-east script. -- Satya. |
|
|
Printer-friendly page | Top |
|
|
Dread Legion
Charter Member
|
Apr-29-02, 03:45 PM (EDT) |
|
9. "RE: Finding toys to re-enact EPU sagas"
In response to message #0
|
LAST EDITED ON 05-02-02 AT 09:13 PM (EDT) >* BEC made a variety of 8-inch "Real Model" action figure versions of >the Evas from NGE. Slap on some X-Com decals (eg, printed on your >inkjet), and you've entered NXE. (Formerly available at various video >game stores.) Now replaced by the Kaiyodo/Xebec figures that are going for $10-$25(usally $15) (Currently available at various video game stores) >* "Robotech" toys circa-1985 are a bit rare nowadays. >"Super-posable >Veritechs"> have been promised by robotech.com >for months now, but they look pricey and non-transformable. Try the Macross toys by Yamato, or the Bandai re-releases of the classic 1/55ths. Pricey for college students, but not as bad as the cost of getting one of the old ones. >* Ditto for the few Transformers who've appeared (in non-"Cybertron >Dreams" stories): Optimus Prime, Blaster. These are being re-released. >Further ideas? Somebody make Gryphon watch Rah Xephon... |
|
|
Printer-friendly page | Top |
|
|
Perko
Charter Member
|
Apr-29-02, 06:20 PM (EDT) |
|
10. "RE: Finding toys to re-enact EPU sagas"
In response to message #0
|
>*all* the characters. Human, anyway -- T'skaia might be a problem. If you can't find a random saurian/lizard-man action figure to modify, you're probably not looking hard enough. I'm almost certain I've actually seen Sauron from Marvel Comics running around, and if you cut off his arm flaps and dress him like a pimp, you should be pretty close to T'skaia. -Craig |
|
|
Printer-friendly page | Top |
|
|
|
trigger
Charter Member
1500 posts |
Apr-29-02, 06:50 PM (EDT) |
|
11. "RE: Finding toys to re-enact EPU sagas"
In response to message #10
|
>if >you cut off his arm flaps and dress him like a pimp, you should be >pretty close to T'skaia. <snicker> I'm just picturing T'skaia in the next Austin Powers movie...or worse: Who's the t'skrang private dic That's a sex machine to all the chicks? SKY! Ya damn right! Who is the t'skrang that would risk his neck For his duelist clan? SKY! Can you dig it? Who's the lizard that won't cop out When there's danger all about? Sky! Right On! They say this t'skrang T'skaia is a bad mother SHUT YOUR MOUTH! I'm talkin' 'bout Sky. THEN WE CAN DIG IT! He's a complicated t'skrang But no one understands him but his swordmaster T'skaia Vorokoshiga'ar Ixtixtaaqitl't'chl'Vraihelt Ishkarat! <lol> I couldn't help myself... t. fye: http://www.grudge-match.com/History/harry-shaft.shtml - I disagree with the result... note: edited to stay pc-13 or something... Trigger Argee trigger_argee@hotmail.com Manon, Maccadon, Orado, etc. Denton, never leave home without it. "Pretty ambitious for a tree, isn't it?" |
|
|
Printer-friendly page | Top |
|
|
|
|
Ebony
Charter Member
|
Apr-29-02, 08:50 PM (EDT) |
|
12. "RE: Finding toys to re-enact EPU sagas"
In response to message #10
|
LAST EDITED ON 04-29-02 AT 08:51 PM (EDT) >>*all* the characters. Human, anyway -- T'skaia might be a problem. > >If you can't find a random saurian/lizard-man action figure to modify, >you're probably not looking hard enough. I'm almost certain I've >actually seen Sauron from Marvel Comics running around, and if >you cut off his arm flaps and dress him like a pimp, you should be >pretty close to T'skaia. T'skrang do not dress like pimps, unless they happen to be pimps, and then they have better taste than your average tailless procurer. Take your Hollywood swashbuckler, brighten up the darker colors, and make him lizard-like (t'skrang are warm-blooded and lactate, making them closer to monotremes than lizards), and you have a t'skrang. Make him blueish-green (as opposed to the mud-brown Sauron), and you have Sky. More or less. I have a feeling that Sky would say that he is often imitated, but never duplicated. Ebony the Black Dragon aka Draco Draconis Ebenium known to FASA as Aaron F. Johnson, Senior Editor, Living Room Games http://www.lrgames.com (who makes Earthdawn and, thusly, knows the t'skrang pretty well) |
|
|
Printer-friendly page | Top |
|
|
|
|
thorne
Charter Member
|
May-02-02, 09:18 PM (EDT) |
|
18. "RE: Finding toys to re-enact EPU sagas"
In response to message #10
|
Regarding T'skaia, Perko wrote on 4/29: >If you can't find a random saurian/lizard-man action figure to modify, >you're probably not looking hard enough. I'm almost certain I've >actually seen Sauron from Marvel Comics running around <...>Action figures, yes, but in LEGO minifig scale? I haven't checked any of the LEGO enthusiast sites (Lugnet, Brickshelf) -- somebody *might* have done a custom. Do T'skrang have extended skulls? TLG has licensed the new "Spider-Man" film (as part of the "LEGO Studios" line), and there's a Green Goblin minifig in the eponymous 1374-"Green Goblin" set. GG's head might make a good start (once the leering face was Sculpey-modified). T'skaia's tail, however... (Lugnet points to a "minifig generator" at Legophile, but it seems to be offline. I don't know if it outputs GIFs in the right proportions for torso-decals, or what...) -- Phillip Thorne The Non-Sequitur Express - usually accurate, sometimes relevant, occassionally timely "Now, witness the power of my compass!" --Invader Zim |
|
|
Printer-friendly page | Top |
|
|
|
|
|
|
thorne
Charter Member
|
May-02-02, 09:46 PM (EDT) |
|
20. "RE: Finding toys to re-enact EPU sagas"
In response to message #13
|
WengFook wrote on 5/1: >to actually collect and kludge the models/toys to represent the proper >characters would cost well into the thousands league. Well, if one weren't selective in which characters/eras to depict... and bought all the now-rare mecha toys... and didn't already have a large capital investment in bricks... perhaps yes. If so, the activity would truly qualify as an obsession. And then sensationalist journalists could write stories about how fanfic makes readers wEiRd (and users of LaTeX, weirder). Hey! Cardboard cutouts! Minifigs of the characters, standing in front of to-scale 2D reps of the large props. It's "LEGO Studios" meets "The Mainframe Players". -- Phillip Thorne The Non-Sequitur Express - usually accurate, sometimes relevant, occassionally timely "I'll use this planet's magnetic field against it!" --Invader Zim |
|
|
Printer-friendly page | Top |
|
|
|
|
Offsides
Charter Member
1264 posts |
May-02-02, 05:41 PM (EDT) |
|
17. "RE: Finding toys to re-enact EPU sagas"
In response to message #14
|
>>One could try to rebuild the 7166-"Imperial Shuttle" in blue to recreate Truss's Network 23 >>_Morning Sun_, but I don't think all the necessary elements are *available* in blue. > >NOTE: If anyone ever manages to accomplish this, we need to >talk. Immediately. I just checked out the lego site and they definitely don't have the necessary parts assortment available at the moment... so my guess is that spray paint is the only other option :) Offsides Unemployed netadmin seeking job... so what else is new? EPU RCW #π #include <lego.h> |
|
|
Printer-friendly page | Top |
|
|
|
|
Kokuten
Charter Member
|
May-03-02, 04:42 PM (EDT) |
|
22. "RE: Finding toys to re-enact EPU sagas"
In response to message #17
|
LAST EDITED ON 05-03-02 AT 04:48 PM (EDT) >>NOTE: If anyone ever manages to accomplish this, we need to >>talk. Immediately. > >I just checked out the lego site and they definitely don't have the >necessary parts assortment available at the moment... so my guess is >that spray paint is the only other option :) errr.. maybe not...
http://www.worlduph.com/semdye.htm better than spray paint, at least on meece and plastic case bits, as well as speakers. I draw this from a several-particle on "how to make a truly black PC case". soo.. build your beast out of white and make it Tahoe blue? http://www.ldraw.org/ or build it virtually? |
|
|
Printer-friendly page | Top |
|
|
|
|
|
|
|
|
|
|
|
|
thorne
Charter Member
|
May-10-02, 10:37 PM (EDT) |
|
28. "RE: Finding toys to re-enact EPU sagas"
In response to message #14
|
Truss wrote: >NOTE: If anyone ever manages to [render the _Morning Sun_ in LEGO bricks], >we need to talk. Immediately.(I thought I'd replied to this, last week, with some notions, but the post seems to have vanished. No matter; those notions are now plastic.) Okay, the first segments of my first prototype are now on display in my BrickShelf gallery dedicated to the _Morning Sun_. Thus far, there's one photo, a copyright-lettered copy of the graphic from the ship's writeup (for reference), and a textual writeup. Please excuse the temporary non-blue bricks -- I have the right parts, but not easily accessible just now. Does anyone know where exactly the ramp in the _Lamda_-class is located (or more usefully, where the _Morning Sun_ has moved it)? The ship's underbelly IMHO is a silly location -- how *does* it manage two meters of ground clearance on only two legs? -- Phillip Thorne The Non-Sequitur Express - usually accurate, sometimes relevant, occassionally timely "It's not dirt!" --Invader Zim |
|
|
Printer-friendly page | Top |
|
|
|
|
Gryphon
Charter Member
22411 posts |
May-24-02, 06:22 PM (EDT) |
|
32. "RE: Finding toys to re-enact EPU sagas"
In response to message #31
|
>I'm not sure which is cooler, the shorter link idea or the actual toy. The person that came up with makeashorterlink's concept deserves a medal. As for the model, well... I'm a little disturbed that "STAP" apparently stands for "Single Trooper Attack Pogostick", if the design sketches shown in one of the featurettes on the Episode I DVD set are to be believed. :) Battle droids are cool, though. --G. -><- Benjamin D. Hutchins, Co-Founder, Editor in Chief, Netadmin Eyrie Productions, Unlimited http://www.eyrie-productions.com/
|
|
|
Printer-friendly page | Top |
|
|
|
|
satyap
Charter Member
|
May-24-02, 10:30 PM (EDT) |
|
33. "RE: Finding toys to re-enact EPU sagas"
In response to message #32
|
>The person that came up with makeashorterlink's concept deserves a >medal. Sorry 'bout that. mak(ing)ashorterlink didn't occur to me. >As for the model, well... I'm a little disturbed that "STAP" >apparently stands for "Single Trooper Attack Pogostick", if the design You serious?! I didn't paint it :-( And I don't want to mount it on the STAP, I wanna play with it. It still doesn't have arms because of that. Anyone wanna see a pic? The camera's dead because some idiot left it on for several hours, but I could use the webcam... >Battle droids are cool, though. "...I know kung-fu." Heehee. I suppose I could install a voice chip and associated hardware in the body of this one so it could say that. There's a couple cubic centimetres of space in there (eyeballing it to be about 15x15x15mm). I don't have the time, knowledge, or money. -- Satya. |
|
|
Printer-friendly page | Top |
|
|
|
|
|
|
Sofaspud
Member since Apr-7-06
433 posts |
Jul-29-02, 12:19 PM (EDT) |
|
35. "RE: Finding toys to re-enact EPU sagas"
In response to message #32
|
>>I'm not sure which is cooler, the shorter link idea or the actual toy. > >The person that came up with makeashorterlink's concept deserves a >medal.YES! > >As for the model, well... I'm a little disturbed that "STAP" >apparently stands for "Single Trooper Attack Pogostick", if the design >sketches shown in one of the featurettes on the Episode I DVD >set are to be believed. :) Looking at the, uh, STAP (?!?), I'm puzzled. *IF* those two turbine-looking thingies (yessir, that's a technical term) are, in fact, turbines... then wouldn't the exhaust melt the droid's legs? Or rip them off entirely? Thus I can only surmise that they're not turbines... but damned if they don't look like 'em! --sofaspud --
--sofaspud -- |
|
|
Printer-friendly page | Top |
|
|
|
version 3.3 © 2001
Eyrie Productions,
Unlimited
Benjamin
D. Hutchins
E P U (Colour)
|